Answers to your NDI questions

The NDI button is dark grey, why can't I tap it to turn on the transmission?
- The button is dark because the network is not connected or configured. Check that your device is connected to a Network.
Where are the Wi-Fi and Ethernet tabs, and how do I configure the network?
- From the main menu, select the Connect Tab.
  - Next, tap on the button to enable network features.
  - Click OK if prompted to reboot the device.
  - Once the Ninja has rebooted, open the menu and select the Connect tab and tap the same button as before that now indicates Atomos Cloud Studio. It will change from blue to grey. Your Ninja device is now ready to be configured to use NDI.
Can I play out a recording from my device?
- It is not possible to play out from a recording on disk to the NDI network.
The NDI Tools Video/Studio Monitor is not listing my Atomos device and the NDI TX button remains yellow?
1. First, check the network connections of both the Atomos Connect device and the receiving device
2. Make sure that both devices are on the same subnet, for example, all the NDI devices need to have an IP address like this, 192.168.10.xxx where only the 'xxx' value is different between devices.
3. Using a computer, try to ping the devices
What are the blue icons indicating about NDI?

	(NDI>HD) The input source has been downscaled to 1920 x 1080 for NDI transmission
	(NDI CROP) The input signal has been cropped from DCI 17:9 to HD 16:9 for NDI transmission
	(NDI<FPS) The frame rate has been reduced for NDI transmission
	(NDI-QLTY) Multiple of the above changes have been applied to NDI transmission