Inserting and Removing Media

Inserting Media

On the rear of the unit is a 2.5” slot designed for your media. To insert an AtomX SSDmini, Master Disk Caddy II/III or the AtomX CFast adapter, gently push the media into the slot until it stops at the end of the drive slot.

Removing Media

The SSDmini, Master Caddy II/III and the AtomX CFast adapter are all hot-swappable, so you can remove the media at almost any time – even while the unit is turned on. But don’t do it while recording or you will get a corrupted file that may be unplayable. To remove media, simply pull it out from the slot by holding the top and bottom tabs on the media itself.

The SHOGUN CONNECT disk slot does NOT have a release latch for media. It is a friction-fit system. Simply pull the SSDmini / Master Caddy II/III out using the top and bottom tabs on the caddy itself.

The included AtomX SSDmini Handle can be attached to your AtomX SSDmini. This allows it to be used with existing ATOMOS Master Caddy II devices, and also reduces handling and potential damage to the disk casing.

AtomX SSDmini is backwards compatible with previous ATOMOS recorders. The original Master Caddy 1 is NOT compatible with SHOGUN CONNECT as the keyways are on one side only.