Input Menu - Input via SDI

The SDI IN connector on your SHOGUN CONNECT allows you to connect 12G SDI sources to your device. Tap on Input and the Source Menu tab will open, where you can select SDI as your input. You will then be prompted to reboot your SHOGUN CONNECT. Tap Confirm and wait for your device to reboot in SDI source mode. Once in this mode, the input menu will resemble the image shown above.

When RAW over SDI is enabled on a connected camera, your SHOGUN CONNECT will automatically detect the RAW signal and prompt you to select ProRes RAW as the recording codec.

Mode

When connected to an SDI source, Mode indicates the current mode:

• Single Mode: For single SDI sources, where a single SDI input is connected to the SDI In connector.

Channel Source / Link Status

In Single Mode, a Channel Source indicator will appear and display the currently selected channel. Single link SDI connections will automatically be configured based on the signal input between 12G/6G/3G/HD.

Compatibility Mode (SDI)

Where SDI has been selected as your input, a Compatibility Mode toggle switch will be visible under Source. This mode improves the signal locking process over SDI, when working with specific cameras that use a slightly different version of the 12G standard. For more information refer to atomos.com/support