CAST - Input Menu

The Input menu provides information and settings for the 4 x HDMI inputs on AtomX Cast.

HDMI ICONS 1 > IN | 2 > IN | 3 > IN | 4 > IN

The HDMI icons for each input will be white where a valid input is detected. The icons will be faded with an ‘x’ when no input is connected. The physical 1,2,3,4 buttons on the AtomX Cast will also have a white light when a valid input is detected and will not be illuminated when there is no input.

If an input is not detected, unplug and reconnect the HDMI cable for the input to AtomX CAST.

Name

Provides information on the names of each input.

Primary Input

A green circle with a ‘P’ will be visible below the source that is the current Primary Input. The Primary Input will determine the project rate and provide sync for other inputs. By default, the first connected source will be used as the Primary Input. To select another source, tap on the white circle in the Primary Input row, below another input. Other inputs with a different frame rate up to 1080i/p60 will be conformed in the background to match the project rate.

Ensure that you have selected the project rate before going live, as this cannot be changed when live. If you do change the project rate whilst being LIVE you may lose your USB-C connection, and have to unplug it and reboot the device.

Video Mode

Displays the resolution and frame rate for each input. No Input will be displayed where a valid input is not detected.

Project Rate

The frame rate of the Primary Input will be used as the Project Rate by default, and all other inputs up to 1080i/p60 will be conformed to this frame rate.

Graphics

Indicates the graphical overlay presets that are applied to each input.

Audio Pairs

Indicates how many audio pairs are associated with each input. No Input will be displayed where a valid input is not detected.