The Output menu allows you customize your setup, by choosing what to display on the outputs.
Displays the mode that each of the outputs is currently set to. The icons will be faded with an ‘x’ when not connected.
NINJA V+ OUT
Allows you to select the mode for the NINJA V+’s HDMI Out connector, for displaying on a secondary output. The frame rate will be the same as the project rate. Tap on the currently selected mode to cycle through the following options:
Program: Displays the ‘program’ that you are streaming to your audience. This mode shows you exactly what they will see.
Preview: Allows you to preview inputs before you cut to them in the program feed, as well as preview graphics.
Multiview: This mode allows you to see all four inputs at once, without Graphic overlays, PiP, Program/Preview and audio channel status
CAST OUT / CAST USB-C
Displays the current mode for the HDMI Program Out and USB-C connectors on AtomX CAST. These outputs are linked and will always display the program feed.
Displays conversions of resolution and frame rate. A green circle with a tick will indicate successful FPS conversion to the project rate. A circle with an ‘X’ will be displayed in the CAST OUT and CAST USB-C columns when FPS conversion is not activated.
CAST USB-C streaming output is limited to a maximum of 1920x1080p30. For projects that have a frame rate of 50p or 60p, FPS conversion will be applied, and both the HDMI and USB-C outputs from the AtomX CAST will output at a half frame rate i.e p50 as p25 and p60 as p30.
HDMI projects can be output as 1920x1080p50 or p60 without FPS conversion but the CAST USB-C streaming output will not be available.
FPS conversion can only be activated when you are not live.