Turning ON power to the NINJA V
The Power button is located on the top right hand side of the unit (as you look at the screen). With a power source connected, momentarily press the Power button. After a couple of seconds you will see the ATOMOS logo then the NINJA V Home Screen.
Turning OFF power to the NINJA V
To turn the unit off, tap the battery icon on the top right of the home screen to open the Power menu screen.
On the Power menu screen press the green Power icon for 4 seconds.Four seconds can seem like a long time, but this is intentional to make sure that the NINJA V can’t be turned off accidentally.
The icon will turn red when touched to indicate activation of the button. The unit will then power off. You can also do a forced power down by pressing the physical Power button on the side of your NINJA V for four seconds.
For more information on the Power menu see the Power Down section.
Do not press and hold the power button in on the NINJA V while the unit is off. This will place the device in to a Firmware recovery mode. If you accidentally do this, simply turn the device off again or remove the power source.
Take note to respect the air flow and do not obstruct the cooling vents of the unit.
Comments
1 comment
Firmware v11 does not have the power off button shown above as v10 had
Please sign in to leave a comment.