Attaching AtomX CAST to your NINJA V

How to attach AtomX CAST to NINJA V:

1. Place AtomX CAST on a flat surface with buttons facing upwards, and undo the 1/4-20 screw in the center of the unit to release the top bracket. Line up the AtomXpansion port of the NINJA V with the expansion module on the AtomX CAST.

2. Gently slide the AtomX CAST into the AtomXpansion port until it clicks into place.

3. Tighten the 1/4-20 screw on the top bracket to the top mounting point on NINJA V to secure it in place.

4. To remove the AtomX CAST from your NINJA V, undo the 1/4-20 screw on the top bracket and press the NINJA V’s battery release button. Gently slide the AtomX CAST away from the NINJA V.